TUBE EXPANDER EQUIPMENT AND TOOLS

SERIES 41-A, 44-A

3 Roll Condenser Expanders —
1/4 to 3/8-Inch Outer Diameter — (1" (25.4mm) Roll Length)

The Series 41-A and 44-A Expanders were primarily designed for very small tubes as generally found on lubricating oil coolers and heat exchangers of similar characteristics. It features an adjustable ball bearing collar to meet the requirements of various thicknesses of tubesheets. The assembly comes complete with mandrel, rolls, cage, and collar with a flush (for 1/4-inch size) or 1/16 recess (for 3/8-inch size).

NOTE: On selection of expanders, wall thickness of tubes run either nominally or minimum wall.

A = 1/4 (6.4mm) to 3/8-inch (9.5mm) tube Outer Diameter

B = 18 (1.2mm) to 28 (.4mm) Gauge

C = 41-A - 1/4 (6.4mm) to 1-Inch (25.4mm)
       44-A - 1 (25.4mm) to 3 1/2-Inch (89.0mm)


Tube   41-A Expander 1/4-1-Inch Reach 44-A Expander 1-3 1/2-Inch Reach 1-Inch (25.4) Roll Length Common Roll Set - Part No.
OD GA Range Assembly Mandrel  Cage Assembly Mandrel  Cage
Inches (mm) Inches (mm) Part No. Part No. Part No. Part No. Part No. Part No.
1/4 (6.4) 18 .147-.174 (3.7-4.4) 34339 34348 - - - 34375
19 .159-.186 (4.0-4.7) 34388 34380 34389 - - - 34390
20 .175-.202 (4.4-5.1) 34338   34347 - - - 34374
21 .180-.207 (4.6-5.3) 34385 34387 34386 - - -
22 .189-.216 (4.8-5.5) 34337 34346 - - -
23 .195-.222 (5.0-5.6) 34408 34413 - - - 34417
24 .201-.228 (5.1-5.8) 34336 34379 34345 - - - 34373
26 .209-.236 (5.3-6.0) 34407 34412 - - - 34416
28 .216-.244 (5.5-6.2) 34391 34400 - - - 34399
3/8 (9.5) 15 .225-.266 (5.7-6.8) 34418 34419 33955 33965 34373
16 .237-.278 (6.0-7.1) 34335 34378 34344 33956 33954 33966 34372
17 .253-.294 (6.4-7.5) 34406 34411 33957 33967 34399
18 .269-.310 (6.8-7.9) 34334 34343 33958 33968 34371
19 .283-.324 (7.2-8.2) 34405 34377 34410 33959 33953 33969 34415
20 .297-.338 (7.5-8.6) 34333 34342 33960 33970
21 .303-.344 (7.7-8.7) 34365 34367 33961 33971 34370
22 .311-.352 (7.9-8.9) 34332 34366 34341 33962 33949 33972
23 .317-.358 (8.1-9.1) 34404 34409 33963 33973 34414
24 .323-.364 (8.2-9.2) 34331 34376 34340 33964 33952 33974 34369



 
Expander Lube - Type B
Series 114 Expanders
Wilson Expander Lube is a water-soluble lubricant especially compounded for use with tube expanders. When rolling large or small, ferrous or nonferrous tubes, use Wilson Expander Lube for smoother rolling and longer expander life. For clean tube ends after rolling, simply wash with water. Wilson Expander Lube is used straight from the can without dilution.
 
Expander Lube Type B Part No.
1 Quart Can 28115-0002
1 Gallon Can 28115-0009
5 Gallon Can 28115-0005
30 Gallon Drum 28115-0030
55 Gallon Drum 28115-0055

To request a free quote and receive a t-shirt, click here.