BOILER TUBE EXPANDERS
ACCESSORIES
Tube End Facers —
2 – 3-Inch OD Tubes |
 |
| |
|
|
|
Applications
- To prepare a uniform projection of tube ends prior to expanding the tubes.
- Trim boiler tube ends to a consistent projection before they are bead-rolled.
- De-burr tubes after they are cut or rolled.
Features
- Adjustable Thrust Bearing Collar
- Quickly trim tube ends to desired projection
- Interchangeable, reversible cutter bits are easily replaced
- High Speed Steel Tool Bit
- Recommended speed: 150 rpm
|
| 2 |
(50.8) |
10 |
(3.4) |
44391-0010 |
39673-1700 |
74600-0562 |
| 11 |
(3.0) |
44391-0011 |
39673-1730 |
| 12 |
(2.8) |
44391-0012 |
39673-1750 |
| 13 |
(2.4) |
44391-0013 |
39673-1790 |
| 2-1/2 |
(63.5) |
10 |
(3.4) |
44392-0010 |
39674-2200 |
74600-0750 |
| 11 |
(3.0) |
44392-0011 |
39674-2230 |
| 12 |
(2.8) |
44392-0012 |
39674-2250 |
| 13 |
(2.4) |
44392-0013 |
39674-2290 |
| 3 |
(76.2) |
10 |
(3.4) |
44393-0010 |
39674-2700 |
74600-0750 |
| 11 |
(3.0) |
44393-0011 |
39674-2730 |
| 12 |
(2.8) |
44393-0012 |
39674-2750 |
| 13 |
(2.4) |
44393-0013 |
39674-2790 |
|
| |
| |
