BOILER TUBE EXPANDERS

TOOLS

Tube Finishing/Trimming - Tube/Pipe End Cutters

Tube/Pipe End Cutter
Flat Seal Weld Removers
For 2 to 3-Inch OD Tubes, 1-1/2 to 2-1/2-Inch Pipe
This tool with high speed steel, multiple-tooth cutter and rotating pilot is used principally to remove seal welds of welded boiler tubes, but is also ideal for flat facing tube ends. The cutter diameters are large enough to cut a minimum of a quarter inch beyond the outside of the tubes.

There is complete interchangeability of cutters, pilots and shanks between inside or outside chamfering cutter and flat seal weld remover tools.
 
Tube OD Pipe Size Tool Assembly Spare Cutter
Standard Shank
Inches (mm) Inches (mm) Part No. OD
Inches		 Cut Diameter
Inches		 Part No. M.T. No. Part No. Pilot Part No.
Outer Inner
2 (50.8) 1-1/2 (38.1) 40243 2-1/2 2-1/2 1-7/16 39701 2 39671 39674
39693 3 39672
40244 4 39673
2-1/2 (63.5) 2 (50.8) 40245 3 3 1-1/2 39702 2 39671
39694 3 39672
40246 4 39673
3 (76.2) 2-1/2 (63.5) 40247 3-1/2 3-1/2 1-7/8 39703 2 39671
39695 3 39672
40248 4 39673
 

To request a free quote and receive a t-shirt, click here.