Belling Tools |
| |
Belling
Tools (Hand Shank Type)
- These special order tools are made for tube inlet ends that
require seating into the tube sheet, not
projecting. Please use the drawing and chart to supply information
to ensure a proper tool is
provided. Specify hand or power driven.
|
| |
| |
Flaring
Tools
Features:
- Flaring Heat Exchanger Tubes that Project Outside
the Tubesheet
- Suitable for Simultaneous Flare and “Seating”
a Flare into Countersunk tube of similiar angle
- Flare Angle Produced is in Accordance with ASME
and
U.S. Navy Boiler Code |
|
| |
 |
Packing
Removal Tools
Applications:
- Used to remove packing in feamle type joints. Self Piloted
and available in left or right hand configuration. They easily
fit in any standard drill.
|
| |
 |
Packing
Tools
Applications:
- Used to rapidly insert packing into female type tube joints.
|
| |
|
Expander
Lube - Type B
- TWilson Expander Lube is a water-soluble lubricant especially
compounded for use with tube expanders. When rolling large
or small, ferrous or non-ferrous tubes, use Wilson Expander
Lube for smoother rolling and longer expander life. For clean
tube ends after rolling, simply wash with water. Wilson Type
B Expander Lube is used straight from the can without dilution.
|
| |
|
Condenser
Tube Inserts
Features:
- Offers permanent protection for new tubes or extended
life for old condenser tubes already pitted or thinned
at the entrance section.
|
|
| |
 |
