WILSON’S HEAT EXCHANGER - ROLLING MOTORS
Wilson Rolling Motors are designed for rolling ferrous and non-ferrous
tubes in heat exchangers and pressure vessels and perform reversible,
muffled, and controlled tube expansion. Wilson Rolling Motors offer
air-driven, torque-controlled, and electric models. Every Torq-Air-Matic™
Kit includes a special Torq-Air-Matic™ drive, a set of rotor blades,
a mandrel connector, an air line filter, one quart of expander lube,
hex keys, a carrying case, a service manual, and most come with an
operating hose.
Or use our tool guide to help you identify the right Wilson heat exchanger tool.
Available Products
Rolling Motors
| The
Wilson 3A Torq-Air-Matic™ Kit is designed for
expanding 1/2 to 1 1/2-inch (12.7 - 38.1mm)
Outer Diameter tubes. The 3A Model’s drive weighs 9 lbs. (4
Kg) and the kit weighs 21 lbs. (9.5 Kg) and features a
1/2-inch ball drive spindle. With a maximum air consumption
of 32 SCFM, the 3A Model is 9.5 inches (241mm) in length
and 2 inches (50.8mm) from side to center. The Wilson
3A Torq-Air-Matic™ Kit is available on a rental basis.
Please click here if you are interested in Thomas C. Wilson
rental equipment. |
 |
 |
| |
| The
Wilson B Torq-Air-Matic™ Kit is designed for expanding
1/2 to 1 1/2-inch (12.7 - 38.1mm) Outer Diameter tubes.
The B Model’s drive weighs 14.5 lbs. (6.6 Kg) and
the kit weighs 30.5 lbs. (13.8 Kg) and features a 1/2-inch
spindle square. With a maximum air consumption of 60 SCFM,
the B Model is 12 inches (305mm) in length and 2 inches
(50.8mm) from side to center. The Wilson B Torq-Air-Matic™
Kit is available on a rental basis. Please click here if you are interested in Thomas C. Wilson rental equipment. |
 |
|
| |
| The
Wilson Model 952 is designed for expanding 1/4
to 1 3/8-inch (6.4 - 31.8mm) Outer Diameter tubes. The 952 Model’s
drive weighs 3 lbs. (1.4 Kg) and features a 1/4-inch square
quick connector. With a maximum air consumption of 16
SCFM, the 952 Model is 6 3/4 inches (172mm) in length.
This model comes with a 1/4-inch square mandrel connector
and an operating hose. |
 |
|
| |
| The
Wilson Model 930 is designed for expanding 1
to 1 1/2-inch (2.54 - 38.1mm) Outer Diameter tubes. The 930 Model’s
drive weighs 4.5 lbs. (2 Kg) and features a 1/2-inch ball
drive spindle. With a maximum air consumption of 32 SCFM,
the 930 Model is 7 1/2 inches (190mm) in length and
.9 inches (23mm) from side to center. This model comes
with a 3/8-inch square mandrel connector. Please note
that the 930 Model does not come with an operating hose. |
 |
|
| |
| The
Wils-Tronic™ Tube Roller is designed for expanding 1/2 to 3-inch (12.7 - 76.2mm) Outer Diameter tubes and maintains constant speed during the entire rolling process, even at various torque settings, making it faster and more efficient than conventional tube rollers. This tube roller provides two modes of operation: manual and automatic. The Wils-Tronic™ Tube Roller offers constant rpm at various torque settings and an "auto-cycle" feature that allows for continuous rolling of multiple tubes. Operating with a very low noise level, the Wils-Tronic™ Tube Roller offers flexibility when working with expanders, cutters, and reamers. This tube roller also features a fully programmable keypad and security lockout by password. The Wils-Tronic™ Tube Roller is available on a rental basis. Please click here if you are interested in Thomas C. Wilson
rental equipment.
|
|
|
| |
| The
Wilson Electronic Torque Control Box allows for
torque-controlled tube expansion in any condition. Easy
to set up, the system allows users to roll tubes in less
than 3 minutes and provides accurate and repeatable tube-to-tube
seat expansions on heat exchangers, condensers, and boilers.
The system consists of a range of electric motors and
control boxes. Automatically stopping the motor when selected
torque is reached, control boxes are adjustable for expanding
torque and are available in automatic reverse or manual
reverse depending on the model of the motor selected and
in 110V or 220V single-phase supply choices. Digital torque
control boxes come with an auxiliary signal light which
goes out when the required torque value is met. Motors
are on/off reversing and equipped with a dead handle that
gives operators added leverage and maneuverability. |
|
| |
Contact Us
For more information on Wilson’s Tube Expander Equipment and Tools, to receive a quote, or ask a question, please contact us. We look forward to hearing from you.
Click here for more information on our catalog
Click here to download catalogs and manuals
|
