TC Wilson

1-800-230-2636

BOILER TUBE EXPANDERS

CUTTERS

Tube or Pipe End Cutter - 45° Inside Chamfering Tool

Inside Chamfering Pipe End Cutter
Cutter for 2 to 3-Inch OD Tubes, 1-1/2 to 2-1/2-Inch Pipe
This tool with high speed steel cutters and rotating pilots is used for inside chamfering of tubes or pipe ends prior to welding. The replaceable cutters are of multiple-tooth design to avoid chattering and provide long life.
 
Tube OD Pipe Size Tool Assembly
Part No. 		Spare Cutter Standard Shank Pilot
Part No.
OD
Inches		 Cut Diameter
Inches		 Part No.
Inches (mm) Inches (mm) Outer
 Inner
 M.T.
No.		 Part No.
2 (50.8) 1-1/2 (38.1) 40232 2-1/8 2-1/8 1-7/16 39685 2 39671 39674
39677 3 39672
40233 4 39673
2-1/2 (63.5) 2 (50.8) 40234 2-5/8 2-5/8 1-1/2 39686 2 39671
39678 3 39672
40235 4 39673
3 (76.2) 2-1/2 (63.5) 40236 3-1/8 3-1/8 1-7/8 39687 2 39671
39679 3 39672
40237 4 39673
NOTE 1: Alternative Morese Taper Shanks are interchangeable on all tools and may be selected in place of the listed standard shanks. #2 M.T., No. 39671, #3 M.T., No. 39672, #4 M.T., No. 39673
NOTE 2: The Pilots are furnished in a diameter to suit the specific Tube I.d. When ordering: Either specify Pilot diameter desired, or the OD and Gauge or Wall Thickness of the tube or pipe that cutter is to be used with.