TC Wilson

1-800-230-2636

BOILER TUBE EXPANDERS

TUBE FINISHING/TRIMMING

Miscellaneous Angles - Multi-Tooth -
Seal Weld Groove and Tube End Outside Chamfer Superheater Tube Cutter - With Swivel
Seal Weld Groove and Tube End Outside Chamfer Tube Cutter
Multi-Tooth - With Swivel
1/2-Inch Square Drive Motor
100-125 rpm

Swivel accessories are ball bearing for tubes 1-1/4-inch Outer Diameter and up.
 
Tube OD Pilot
Diameter		 Cutter
Diameter		 Chamfer
Angle		 Cutter
Assembly		 Cutter Cutter Assembly Parts Swivel Assembly Swivel Assembly Parts
Shank Pilot Swivel Washer Screw Bearing
Inches (mm) Inches Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No.
1 (25.4) .805 1-1/2 22-1/2° 72600-8053 72600-0001 72474-0002 72464-8053 72544-0002 72544-0008 72544-0007 38070 —
1-1/4 (31.8) .980 2-1/8 20° 73621-9803 73621-0001 72464-9803 72951 72951-0001 — 39523 72951-0004
1.035 1-3/4 28° 72545-0353 72545-0001 72464-0353
1-5/8 72936-0353 72936-0001
2 20° 73293-0353 73293-0001
1-3/8 (34.9) 1.130 1-3/4 28° 72655-1303 72655-0001 72464-1303
1-1/2 (38.1) 1.230 2 20° 73620-2303 73620-0001 72464-2303
1.247 1-7/8 28° 72554-2473 72554-0001 72464-2473
2-3/32 72907-2473 72907-0001