Belling Tools

Belling Tools (Hand Shank Type)

• These special order tools are made for tube inlet ends that require seating into the tube sheet, not
  projecting. Please use the drawing and chart to supply information to ensure a proper tool is
  provided. Specify hand or power driven.

Flaring Tools

Features: Flaring Heat Exchanger Tubes that Project Outside the Tubesheet Suitable for Simultaneous Flare and “Seating” a Flare into Countersunk tube of similiar angle Flare Angle Produced is in Accordance with ASME and U.S. Navy Boiler Code

Packing Removal Tools

Applications:

• Used to remove packing in feamle type joints. Self Piloted and available in left or right hand configuration. They easily fit in any standard drill.

Packing Tools

Applications:

• Used to rapidly insert packing into female type tube joints.

Expander Lube - Type B

• TWilson Expander Lube is a water-soluble lubricant especially compounded for use with tube expanders. When rolling large or small, ferrous or non-ferrous tubes, use Wilson Expander Lube for smoother rolling and longer expander life. For clean tube ends after rolling, simply wash with water. Wilson Type B Expander Lube is used straight from the can without dilution.

Condenser Tube Inserts

Features: Offers permanent protection for new tubes or extended life for old condenser tubes already pitted or thinned at the entrance section.