Tube Rolling Tools for Heat Exchangers
Thomas C. Wilson's Tube Rolling Tools are designed for rolling ferrous and non-ferrous tubes in heat exchangers and pressure vessels. These Tube Rolling Tools perform reversible, muffled and controlled tube expansion. Select from air-driven, torque-controlled and electric tube roller models. Every Torq-Air-Matic™ Kit includes a special Torq-Air-Matic drive for easy tube rolling, a set of rotor blades, a mandrel connector, an air line filter, one quart of expander lube, hex keys, a carrying case and a service manual. Most of these tube rollers also come with an operating hose.
Available Products
Tube Rolling Tools
|
The Wilson 3A Torq-Air-Matic Kit is designed for expanding 1/2 to 1 1/2-inch (12.7–38.1 mm) Outer Diameter tubes. The 3A Model's drive weighs 9 lbs. (4 Kg) and the kit weighs 21 lbs. (9.5 Kg) and features a 1/2-inch ball drive spindle for easy tube rolling. With a maximum air consumption of 32 SCFM, the 3A Model is 9.5 inches (241 mm) in length and 2 inches (50.8 mm) from side to center. The Wilson 3A Torq-Air-Matic Kit is available on a rental basis. Please click here if you are interested in renting a Thomas C. Wilson tube rolling machine.
|
|
 |
| |
| The
Wilson B Torq-Air-Matic Kit is designed for expanding 1/2 to 1 1/2-inch (12.7–38.1 mm) Outer Diameter tubes. The B Model's drive weighs 14.5 lbs. (6.6 Kg) and the kit weighs 30.5 lbs. (13.8 Kg) and features a 1/2-inch spindle square. With a maximum air consumption of 60 SCFM, the B Model is 12 inches (305 mm) in length and 2 inches (50.8 mm) from side to center. The Wilson B Torq-Air-Matic Kit is available on a rental basis. Please click here if you are interested in renting a Thomas C. Wilson tube rolling machine. |
 |
|
| |
| The
Wilson Model 952 is designed for expanding 1/4 to 1 3/8-inch (6.4–31.8 mm) Outer Diameter tubes. The 952 Model's drive weighs 3 lbs. (1.4 Kg) and features a 1/4-inch square quick connector. With a maximum air consumption of 16 SCFM, the 952 Model is 6 3/4 inches (172 mm) in length. This model comes with a 1/4-inch square mandrel connector and an operating hose. |
 |
|
| |
| The
Wilson Model 930 is designed for expanding 1 to 1 1/2-inch (2.54–38.1 mm) Outer Diameter tubes. The 930 Model's drive weighs 4.5 lbs. (2 Kg) and features a 1/2-inch ball drive spindle. With a maximum air consumption of 32 SCFM, the 930 Model is 7 1/2 inches (190 mm) in length and .9 inches (23 mm) from side to center. This model comes with a 3/8-inch square mandrel connector. Please note that the 930 Model does not come with an operating hose. |
 |
|
| |
| The
Wils-Tronic™ Tube Roller is designed for expanding ½-inch to 3-inch (12.7–76.2 mm) Outer Diameter tubes and maintains constant speed during the entire tube rolling process, even at various torque settings, making it faster and more efficient than conventional tube rollers. This tool provides two modes of tube rolling: manual and automatic. The Wils-Tronic Tube Roller offers constant rpm at various torque settings and an "auto-cycle" feature that allows for continuous rolling of multiple tubes. Operating with a very low noise level, the Wils-Tronic Tube Roller offers flexibility when working with expanders, cutters and reamers. This tube roller also features a fully programmable keypad and security lockout by password. The Wils-Tronic Tube Roller is available on a rental basis. Please click here if you are interested in renting a Thomas C. Wilson tube rolling machine. |
|
|
| |
| The
Wilson Electronic Torque Control Box allows for torque-controlled tube rolling in any condition. Easy to set up, the system allows users to roll tubes in less than 3 minutes and provides accurate and repeatable tube-to-tube seat expansions on heat exchangers, condensers and boilers. The system consists of a range of electric motors and control boxes. Automatically stopping the motor when selected torque is reached, control boxes are adjustable for expanding torque and are available in automatic reverse or manual reverse, depending on the model of the motor selected and in 110V or 220V single-phase supply choices. Digital torque control boxes come with an auxiliary signal light that goes out when the required torque value is met. Motors are on / off reversing and equipped with a dead handle that gives operators added leverage and maneuverability. |
|
| |
Contact Us
Contact us for more information or a quote on one of Wilson's Tube Rolling Tools.
|
