 |
|
1/4 to 4-Inch ID Tubes in Heat Exchangers, Condensers, Chillers,
Absorbers, Fire Tube and Water Tube Boilers |
Removes
Light to Medium Debris
Available in nylon, brass, steel, and stainless steel. Always match metals,
using bronze for nonferrous tubes and steel for ferrous
metals. Nylon brushes can be used with all tubes and will
not damage the interior tube wall! |
Wils-Away™
Electric and Pneumatic Tube Cleaning Systems |
|
 |
1/2 to 1-Inch ID Tubes in Surface Condensers and Enhanced
Tubes in Heat Exchangers |
Cleans
Enhanced and Surface Condenser Tubes
Wilson Spin Grit Brushes feature silicone carbide-impregnated
long bristles that lay over to clean prime surfaces in
condenser tubes. Wilson Spin Clean Brushes use tapered trim,
abrasive-impregnated brushes to clean enhanced tubes in
heat exchangers. |
ALL Wilson
Electric and Pneumatic Tube Cleaning Systems |
|
|
 |
1/2 to 6-Inch ID Tubes in Heat Exchangers, Condensers, Chillers, Absorbers, Fire Tube, and Water Tube Boilers |
Removes Soft to Powdery Deposits
The BEST value in tube cleaning, the Wilson Expanding Brush lasts at least 10 times longer than fixed diameter brushes, and refills keep the expanding brush both durable and economical. Available with nylon, bronze, steel, or stainless steel bristles. |
ALL Wilson
Electric and Pneumatic Tube Cleaning Systems |
|
|
 |
1/2 to 6-Inch ID Tubes in Heat Exchangers, Condensers,
Chillers, Absorbers, Fire Tube and Water Tube Boilers |
Removes
Wet and Gummy Deposits
Centrifugal force lifts scraper blades, forcing them against
tube interior and adjusting automatically for changes
in tube ID. Scraper refills prolong the life of this cleaning
head and Keep it very economical. |
ALL Wilson
Electric and Pneumatic Tube Cleaning Systems |
|
|
 |
3/8 to 3-Inch ID Tubes in Heat Exchangers, Condensers,
Chillers, Absorbers, Fire Tube and Water Tube Boilers |
Removes
Light to Medium Scale
The Wilson Buffing Tool is available with a unique drill tip
that cuts through heavier deposits. Also use the Buffing
Tool to finish tubes after initial cleaning by Wilson
Cutter Heads, Drill Heads or Cutter Bits. |
ALL Wilson
Tube Cleaning Systems (and competing drive units) |
|
|
 |
1/2 to 2-Inch ID Straight or Curved Tubes in Heat Exchangers,
Condensers, Chillers and Water Tube Boilers |
Removes
Thin to Medium Soft or Hard Scale
Model A Cutter Head attaches directly to motor. Model
B Cutter Head attaches to Type C Flexible Holder for curved
tube cleaning. All cutter heads feature non-tracking design
for more effective cleaning. |
ALL Wilson
Tube Cleaning Systems |
|
|
 |
1 3/8 to 22-Inch ID Tubes in Boilers, Power Plants, Refineries
and Other Industrial Applications |
Removes
Heavy, Hard Deposits
Model SE: Straight or curved tubes to 6-inch ID.
Model R: Straight tubes to 11 1/2-inch ID.
Model CHJ: Straight or curved tubes to 22-inch ID.
Swing Frame Brush: Straight pipes to 20 1/2-inch ID. |
Wilson
Air Motors |
|
|
 |
2 to 6-Inch ID Tubes in Fire Tube and Water Tube Boilers,
and Other Large Diameter Pressure Vessels |
Cleans
Totally Clogged Tubes/Hard Scale
Literally drill through clogged tubes and heaviest scale
and coke. Can be used to clean curved tubes by mounting
the drill head on a universal joint or flexible holder. |
ALL Wilson
Tube Cleaning Systems |
|
|
 |
3/8 to 2 3/16-Inch ID Tubes in Heat Exchangers, Condensers,
Chillers, Refineries, Pulp and Paper Plants and Other
Industrial Applications |
Cuts
Through Hard Scale/Plugged Tubes
M Bit: Affordable, general purpose removal of hard scale.
SPE-DUR Bit: Excellent for plugged tubes.
K Bit: Features carbide tip that will break through hardest
scale and deposits. |
PG/PGX-2/TP-302
and other Wilson Tube Cleaning Systems |
|
|
 |
3/8 to 2 3/16-Inch ID Tubes in Heat Exchangers, Condensers,
Chillers, Evaporators and Other Industrial Pressure Vessels |
Post
Cutter Bit Finishing/Push Rod Cleaning
P Brush is used for finishing up after a cutter Bit has
been used to remove hard or heavy scale or deposit. The
P Brush is also used with push rod for manual cleaning
of condensers, evaporators and fire tube boilers. |
PG/PGX-2/TP-302
and other Wilson Tube Cleaning Systems |
|
|
