TC Wilson

1-800-230-2636

Get a Quote

TUBE CLEANING

HEAT EXCHANGERS/CONDENSERS/CHILLERS

Wils-Away™ Electric Tube Cleaning System

Wils-Away Cleaning

 
 
 


 
Applications:
  • Cleaning Straight and Curved Tubes in Heat Exchangers, Condensers, Chillers, Absorbers, Water Heaters, Coolers, and Other Small Diameter Pressure Vessels
  • 3/8 – 1 1/2-Inch (9.5 to 38.1mm) Outer Diameter Tubes
  • Removing Light to Medium Soft Deposits
Specifications:
Dolly-Mounted
Drive Unit:		 55 lbs.; 12”H x 23”W x 11 1/2”D
(25Kg; 305 x 584 x 292mm)
Compact Drive Unit: 35 lbs; 10”H x 18”W x 8 1/2”D
(16Kg; 254 x 457 x 216mm)
Speed: 1,725 rpm
Power: 1/2 HP (WAW-500 Series)
1 HP (WAW-1000 Series)

UL - CE Specific Models Only
Wils-Away™ Kit Includes:
  • Electric Drive Unit (either Dolly-Mounted or Compact Unit)
  • Foot Pedal-Single Direction
  • Spare Safety Shaft Coupling (WAW-500 Series only)
  • 25-Foot Shaft & Casing (7.6M)
  • Set of 6 Nylon Spiral Brushes
    -or-
  • Expanding Bronze Brush and Spare Refill Set
  • Service Manual SM-223 (WAW500, 1000), SM-244 (WAW-520)

------------------------------

Twin foot pedal (for remote forward/reverse control) is an optional accessory.

Check out the Wils-Away™ Electric Tube Cleaning Kit Accessories.


  
Tube ID Range Complete Kit† Drive Unit Flexible Shaft & Casing 6 Nylon Spiral1 Brushes Expanding2 Bronze Brush
Inches (mm)          
.281 - .311 (7.1 - 7.9) WAW-500
(Dolly-Mounted)
- or -
WAW-520
(Compact Unit)it)
115V 50/60 Hz		 9600
- or -
9506		 9720-0015
(8 x 32 Female Thread)		 61746-4025 –
.312 - .342 (7.9 - 8.7) 61746-4028 –
.343 - .374 (8.7 - 9.5) 61746-4031 –
.375 - .405 (9.5 - 10.3) 61746-4034 –
.406 - .436 (10.3 - 11.1) 62501-4037 –
.437 - .499 (11.1 - 12.7) 9722-0025
(1/4 x 28 FemaleThread)		 62501-4043 –
.500 - .561 (12.7 - 14.2) 62501-4050 –
.562 - .624 (14.2 - 15.8) 62501-4056 9900-3003
.625 - .686 (15.9 - 17.4) 9724-0025
(1/4 x 28 Female Thread)		 62501-4062 9900-3006
.687 - .749 (17.4 - 19.0) 62501-4068 2456-30023
.750 - .811 (19.0 - 20.6) 62501-4075 2456-30033
.812 - .874 (20.6 - 22.2) 62501-4081 2456-30043
.875 - .936 (22.2 - 23.8) 62501-4087 2456-30063
.937 - .999 (23.8 - 25.4) 62501-4093 2463-30043
1.000 - 1.061 (25.4 - 26.9) 62501-4100 2463-30053
1.062 - 1.124 (26.9 - 28.5)   9728-0025
(9/16 x 12 Male Thread)		 – 2463-30074
1.125 - 1.186 (28.5 - 30.1) WAW-1000
115V 50/60 Hz 		9610 – 2463-30084
1.187 - 1.249 (30.1 - 31.4) – 2470-30024

† For other than 115V 50/60Hz units, order WAW-510 (220V 50/60Hz), WAW-530 (115V 50Hz), WAW-540 (220V 60Hz),
WAW-550 (220V 50Hz), or WAW-1100 (220V 50/60Hz).
1. For steel spiral brushes, change the last four digits of the Part No. to "0XXX", for stainless steel "2XXX", for brass "3XXX".
2. For expanding brush with nylon bristles, change the last four digits to "4XXX", for stainless steel "5XXX", for steel "0XXX".
3. These expanding brushes require an adapter (Part No. 9589).
4. These expanding brushes require an adapter (Part No. 9798).

 
Smart Tool:
  • Runs wet or dry. When run wet, water aids cleaning action, flushing away scale. When water is clear, the tube is clean!
  • Operates both forward and reverse with twin foot pedal.
  • Simultaneous foot-controlled activization of motor direction and water flushing enable one-man operation.
  • Available as either dolly-mounted or compact easy-to-carry unit. Both units include storage compartment for accessories.

Safety Shaft Coupling

WAW-500 Series drive units are equipped with a safety shaft coupling that snaps under accidental overload, protecting the shaft from breakage. A spare coupling and removal tool are supplied with each kit.

 
Spin Grit Brush Spin CleanBrush SPE-DUR Cutter Bit with Adapter Buffing Tool with Drill Tip Expanding Scraper Model A
Cutter Head		 U-Bend Cleaning Assembly
62551-0050 – –
– 62622-0005
–
7162-9949 62622-0006
7163-9949
62551-0075 7163-9672 –
62615-0075 7164-9664 62622-0007 2569-9587 7211-9662 62690-5000
(Brass Cup
Brush Type)
7165-9950 2575-9587
62551-0100 62615-0100 7166-9950 62622-0010 7212-9662
7167-9666 3055-9589
62551-0125 62615-0112 7168-9666 2578-9589 7213-9795 62660-0075
(Stainless Steel
Wheel Brush Type)
7169-9666 7218-9791
7170-9667 2586-9589 7215-9665
7171-9667 2592-9589
62615-0175 7172-9667 7216-9665 62660-0100
(Stainless Steel Wheel Brush Type)
7173-4386 – 2600-9589 7217-4387
7778-4386 62626-6759 7282-4385
7792-4386 2606-9798