Thomas C. Wilson Tube Tools
Follow LinkedIn Twitter YouTube

Get a Quote

BOILER TUBE EXPANDERS

KITS

Handhole Seat Cleaning Kit

Handhole Seat Cleaning Kit

Handhole Seat Cleaning Kit
(Part No. 9175-1)

The Wilson Handhole Seat Cleaning Kit includes all the tools you need to remove rust, deposits, torn gaskets and other encrustations from boiler drums, sectional headers, plug seats, handholes and pipe flanges. It is also suitable for the surfacing of corners, as well as flat areas of tanks, stacks and bulkheads, prior to painting.

  • Light rust and encrustation, a frequent cause of handhole leaks, are rapidly removed with the kit's special 2-inch diameter cup brush.
  • The air motor that comes with the kit readily converts to a powerful 1/4-inch capacity 4500 rpm drill.
  • The spindle and brush supplied with the kit clean drums and internals.
  • Expanding brushes can be used with the extension spindle to clean tube seat holes to insure optimum rolled joints.


Light rust and gasket encrustations, a frequent cause of handhole leaks, are quickly removed with the special Wilson Cup Brush. A smooth seat is produced up to the corner of the outerbore. The short bristle will not damage the seat.



Clean tube seat holes are essential to producing optimum rolled joints. Both the inside and outside of the drum or sheet hole, as well as the outside of the tube, must be cleaned. Expanding brushes may be used with the extension spindle furnished with the kit.

Handhole Seat Cleaning Kit Consists of:
Part No.
Descriptions
93-2321 Air Motor includes
51199 Dead handle
5760 Hex Key and Wrench (1/2-Inch and 3/4-Inch opening)
51139 Spare Set (4) of Rotor Blades
51211 Drill Chuck with Key (1/4-Inch capacity)
52066 3-1/2-Inch Cup Brush (1/2-Inch A.H. Twisted Wire)
8122 4-Inch Radial Brush (also 1/2-Inch A.H.)
8399 2-Inch Cup Brush for Handhole Seats
51841 Wrench Set for Cup Brush that includes
52376 1/2-Inch Angle Wrench
52377 3/4-Inch Socket Wrench
51829-0004 4-Inch Extension Spindle with Nut
51829-0002 2-Inch Extension Spindle with Nut
2463-0003 Expanding Brush
51846-0004 Extension Spindle for Expanding Brush
50371 3/8-Inch I.D. Air Hose (with 1/4-Inch NPT Couplings, 8 Ft)
6404-0003 Tool Box/Carrying Case
SM-193 Service Manual
Cup Brush Assembly:
Part No.
Descriptions
8399-0002 2-Inch Diam. Cup Brush with 2-Inch Extension Spindle
8399-0004 2-Inch Diam. Cup Brush with 4-Inch Extension Spindle


Air Motor Specifications:
  • 1/4-Inch Capacity
  • 4500 rpm
  • 90 psi
  • 30 SCFM
  • 1/4-Inch NPT Inlet
  • 3 Lbs.
  • 3/8-Inch x 24 Thread