Thomas C. Wilson Tube Tools
Follow LinkedIn Twitter YouTube

Get a Quote

BOILER TUBE TOOLS

TUBE REMOVAL

Hydraulic Tube Cutter

Hydraulic Tube Cutter
For 2, 2-1/2 and 3-Inch OD Tubes


Kit Includes:
  • Hydrualic Tube Cutter with Guide Rolls
  • 3 Sets of Cutter Wheels and Pins
  • Hex Keys
  • Service Manual — SM146C
Click to view demonstration

The Wilson Hydraulic Tube Cutter quickly and efficiently cuts tubes in front of the tube sheet (prior to flaring and/or beading) in seconds. In fact, it cuts a 2-inch Outer Diameter tube in just 8 seconds!

The Wilson Hydraulic Tube Cutter automatically raises the cutter wheel, cleanly cutting through the tube. When the rolling motor is reversed, the cutter wheel is automatically retracted.

This tool needs a minimum 1/2-inch projection to trim tubes, and an adjustable collar ensures that tubes are consistently cut at precisely the right position. We recommend the 909 or 910 Series Air-Driven Rolling Motor (Page 16) or the 22488 Electric Rolling Motor (Page 17). The Wilson Hydraulic Tube Cutter is available for rental.
U.S. Patent No. 4,424,629
 
Tube Hydraulic
Tube Cutter
Part No.
Guide Roll Assembly (2/Set) Cutter Wheel
Part No.
Wheel Pin
Part No.
Length of Tube Cut-Off
Inches (mm)
OD Wall Part No. OD
Inches (mm) GA (mm) Min. Max.
2 (50.8) 9 (3.8) 42741-0009 42366-0009 1.640" 42752 42754

F
L
U
S
H

*4-3/4
(120.6)
10 (3.4) 42741-0010 42366-0010 1.668"
11 (3.0) 42741-0011 42366-0011 1.696"
12 (2.8) 42741-0012 42366-0012 1.718"
13 (2.4) 42741-0013 42366-0013 1.746"
2-1/2 (63.5) 9 (3.8) 42742-0009 41735-0009 2.140" 42753 42755-0001 F
L
U
S
H
9
(228.6)
10 (3.4) 42742-0010 41735-0010 2.168"
11 (3.0) 42742-0011 41735-0011 2.196"
12 (2.8) 42742-0012 41735-0012 2.218"
13 (2.4) 42742-0013 41735-0013 2.246"
3 (76.2) 9 (3.8) 42743-0009 41771-0009 2.640"
10 (3.4) 42743-0010 41771-0010 2.668"
11 (3.0) 42743-0011 41771-0011 2.696"
12 (2.8) 42743-0012 41771-0012 2.718"
13 (2.4) 42743-0013 41771-0013 2.746"
*6-Inch with modified collar