Thomas C. Wilson Tube Tools
Follow LinkedIn Twitter YouTube

Get a Quote

Tube Cutters

For Condensers, Heat Exchangers and Other Pressure Vessels

Push-Type Tube Cutters for 1/2" to 2" OD


Click to view demonstration

Tube Cutter

Tube Cutter





Tube Trimmer

The Tube Trimmer attaches to the Push-Type Cutter



Applications

  • Used where there is considerable projection to be cut off
  • Available for 2 to 5-inch projection
  • To order, specify Outer Diameter and projection

Features

  • For cutting and removal of ferrous or non-ferrous tubes
  • Cuts tubes in seconds
  • Attaches to electric or pneumatic drills
  • Push to cut
  • Pull to retract bit

Tube OD Tube
GA
Tube Sheet Thickness MT Shank Chucking Shank Set of Bits and Pins 
Part No.
Drive Motor
Inches (mm) 1 -
1 1/2-Inch
1 1/2 -
2 1/2-Inchnch
2 -
4 1/2- nch
2 1/2 -
4 1/2-Inchch
1/2 (12.7) 16-17 25000-0001 - - - 1 1/2 (12.7) 25212 932-5000 Air Motor 500 rpm
18-19 25001-0001 - - -
20-24 25200-0001 - - -
5/8 (15.9) 14 25002-0001 25002-0002 - - 25183
15 25003-0001 25003-0002 - -
16-17 25004-0001 25004-0002 - - 25186
18-19 25005-0001 25005-0002 - -
20-24 25006-0001 - 26006-0004 -
3/4 (19.1) 14 25007-0001 - 25007-0004 -
15 25008-0001 - 25008-0004 -
16-17 25009-0001 - 25009-0004 -
18-19 25010-0001 - 25010-0004 -
20-24 25201-0001 - 25201-0004 -
7/8 (22.2) 14-15 25014-0001 - 25014-0004 - 2 25194 932-3000 Air Motor 300 rpm
16-17 25015-0001 - 25015-0004 -
18-19 25017-0001 - 25017-0004 - 25196
20-22 25018-0001 - 25018-0004 -
1 (25.4) 14 25019-0001 - - - 25199
15 25020-0001 - - -
16-17 25021-0001 - - -
18-22 25022-0001 - - -
1 1/4 (31.8) 14 25028-0001 - 25028-0004 - 25206 41239 Electric Drive 110V 250 rpm
15 25029-0001 - 25029-0004 -
16-17 25030-0001 - 25030-0004 -
18-20 25031-0001 - 25031-0004 -
1 1/2 (38.1) 14 25037-0001 - 25037-0004 - 3 3/4 (19.1) 25217
15 25038-0001 - 25038-0004 -
16-17 25039-0001 - 25039-0004 -
18-20 25040-0001 - 25040-0004 -
2 (50.8) 14 - 25239-0001 - 25239-0003 4 25223
15 - 25240-0001 - 25240-0003
16-20 - 25241-0001 - 25241-0003

How to Order
Tube Cutter

Example
Part no. for a 5/8" x 16" Gauge tube in a 2-inch tubesheet with a 1/2-inch Round Chucking Shank is 25004-0502