HEAT EXCHANGER

TWO-PIECE TUBE PLUGS

Two-Piece Tube Plugs — 5/8 to 1-Inch Outer Diameter

Two-Piece Tube Plugs

How to use the tube plug:

  • Sealing off leaky condenser and heat exchanger tubes without damaging tubesheets.
  • Place correct size ring in tube. (Order by tube Outer Diameter and Gauge)
  • Tapered plug is driven into ring, which is tapered on the inside and is parallel to tube on the outside. This gives even expansion to the ring and a long contact to the seal. Available in a variety of metals: stainless steel 316 or 304, carbon steel, and others.
Tube Ring & Pin Set Brass Part No. Tube Ring & Pin Set Brass Part No.
OD Wall OD Wall
Inches (mm) GA Inches (mm) GA
5/8 (15.9) 13 22321-9445 7/8 (22.2) 12 22321-9622
14 22321-9469 13 22321-9696
15 22321-9491 14 22321-9719
16 22321-9505 15 22321-9741
17 22321-9519 16 22321-9755
18 22321-9537 17 22321-9769
19-20 22321-9551 18 22321-9787
21-22 22321-9571 19-20 22321-9801
3/4 (19.1) 12 22321-9537 21-22 22321-9821
13 22321-9571 1 (24.5) 12 22321-9787
14 22321-9594 13 22321-9821
15 22321-9616 14 22321-9844
16 22321-9630 15 22321-9866
17 22321-9644 16 22321-9880
18 22321-9662 17 22321-9894
19-20 22321-9676 18 22321-9912
21-22 22321-9696 19-20 22321-9926
21-22 22321-9946

To request a free quote and receive a t-shirt, click here.