HEAT EXCHANGER

HYDRAULIC COLLET TUBE EXTRACTOR

Hydraulic Collet Tube Extractor — 5/8 to 1 1/4-Inch Outer Diameter

Hydraulic Collet Tube Extractor

How to Order
Simply add the tube Outer Diameter fractional to the kit number

Hydraulic Tube Extractor No. 75700-______ -Kit Consists of Part No.
Extractor Gun (5/8 to 1-Inch OD Tubes) 75700-7001
Power Hose and On/Off Assembly 75700-7210
Hydraulic Power Unit (110V-60 Hz) 75700-7260
Gripper Set (see chart below) 75700-0XXX
Service Manual SM-250
Hydraulic Power Unit (220V-50/60 HZ)
To order 220V Kit, added "220" before the word "Kit"
 75700-7262


Spears
Item Part No. Item Part No.
Spear 0.375 - 0.500 75700-7401 Spear Driver 75700-7331
Spear 0.500 - 0.625 75700-7402 Spear Gripper 75700-7320
Spear 0.625 - 0.750 75700-7403 Yoke 1 - 1 1/2 - 2-Inch 75700-7290
Spear 0.750 - 0.875 75700-7404 Standoff/Depth Stop 75700-7354
Spear 0.875 - 1.000 75700-7405 Large Front Housing 75700-7351
Spear 1.000 - 1.125 75700-7411 Large Mandrel 75700-7183
Spear 1.125 - 1.125 75700-7412    

Spear pulling kit for 5/8-3/4-inch tubes #75700-6275 includes large front housing, large mandrel, spear driver, standoff, yoke and spears (#75700-7402 and -7403).

Pulls 5/8- to 1 1/4-Inch Outer Diameter Tubes

Applications:

  • Quickly and efficiently removes tubes from heat exchangers, condensers, and other pressure vessels tubes.

Features:

  • Uses a heavy-duty, single-action hydraulic cylinder with spring return
  • Quick-disconnect couplings and a heavy-duty, thermal-protected motor
  • 1-1/8 HP electric-hydraulic power unit that delivers 55CFM of oil at 10,000 psi with 115 volt
  • Also available in 220V/50-60 Hz versions
  • The system has a 10-foot hose with spring guards and quick coupler fittings for added maneuverability
  • An external pressure relief valve and Gauge monitor the system's pressure

Benefits:

  • Many times faster than manual tube pulling
  • Trigger operation is fast and efficient
  • Spring return retracts gripper, further improving productivity
  • Minimal training or experience required


Grippers
Tube OD Tube Gripper Set Each Gripper Set Includes These Components:
Inches (mm) GA For Kit No. Gripper Mandrel Stop
5/8 (15.9) 16-19 75700-7055S 75700-7182 75700-7065
16-19 75700-0062 75700-7055M
18-22 (5/8-Inch Kit) 75700-7055L
3/4 (19.1) 16-18 75700-7056S 75700-7066
18-20 75700-0075 75700-7056M
20-22 (3/4-Inch Kit) 75700-7056L
7/8 (22.2) 16-18 75700-7057S 75700-7183 75700-7067
18-20 75700-0087 75700-7057M
20-22 (7/8-Inch Kit) 75700-7057L
1 (25.4) 16-18 75700-7058S 75700-7068
18-20 75700-0100 75700-7058M
20-22 (1-Inch Kit) 75700-7058L
1 1/4 (31.8) 16-19 75700-7355S 75700-7353
19-21 75700-0125 75700-7355M
18-22 (1 1/4-Inch Kit) 75700-7355L

S = Small    M = Medium     L = Large
Extractor can be converted to spear-type pulling for 14 Gauge and heavier. Contact us with your specific requirements.

Available for Rental

To request a free quote and receive a t-shirt, click here.