TC Wilson

1-800-230-2636

Get a Quote

TUBE CLEANING

MOTORS

MS Series Air Motors
MS Series Air Motors
Specifically designed to drive expanding brushes, expanding scrapers and small cutter heads, these high speed motors will clean straight and curved tubes to a high polish. And their steel rotor blades ensure durability and reliability.

If you are looking for MS Series replacement parts, please refer to the charts on the replacement page.
 
Series "MS" Selection Chart Series "MS" Specifications
Nominal Tube ID Motor Model Motor Assy. Motor Body Dia. Rotor Thread Hose & Coupling CFM at 90 psi Weight
Inches (mm) lbs. (Kg)
1/2 (12.7) MS-0 2996 15/32 10-28 * 9 1/8 (.06)
5/8 (15.9) MS-1 3002 9/16 10-28 * 10 3/16 (.09)
3/4 (19.1) MS-1A 3050 11/16 12-24 1/4 12 3/16 (.09)
7/8 (22.2) MS-3 8984 49/64 5/16 x 18 1/4 13 3/16 (.09)
1 (25.4) MS-4 8987 7/8 5/16 x 18 3/8 18 1/4 (.11)
1 1/8 (28.6) MS-5 8989 31/32 3/8 x 16 3/8 25 7/16 (.20)
1 7/32 (31.0) MS-6 8992 1 3/32 7/16 x 14 3/8 30 13/16 (.37)
1 5/16 (35.6) MS-8 8997 1 17/64 7/16 x 14 3/8 35 1 3/16 (.54)
1 3/4 (44.5) MS-10 8999 1 9/16 7/16 x 14 3/8 40 1 11/16 (.77)
*3/16 Motor End only. Manifold End is 1/4.