TC Wilson
1-800-230-2636
Follow LinkedIn YouTube

Get a Quote

TUBE CLEANING

HEAT EXCHANGERS/CONDENSERS/CHILLERS

PG Series Air-Driven Tube Cleaning System
PG Series

PG Series Kit
Applications:
  • Cleaning Tubes in Heat Exchangers, Condensers, Refinery Fixtures, Chillers, Absorbers, Water Heaters, Coolers, Evaporators, and Other Small Diameter Pressure Vessels
  • 1/4 to 1 1/4-Inch (6.4 to 31.8mm) Outer Diameter Tubes
  • Removing Heavy Deposits and Cleaning Out Clogged Tubes
Specifications
Speed 8,000 to 10,000 rpm
Air 80 to 125 psi
Motor Two models cover a wide range of tube sizes

Smart Tool:
  • Carbide tipped Type M Cutter Bits literally drill through the heaviest deposits... even totally clogged tubes!
  • Cleaning depth is easily increased by adding 5-foot hollow extension shafts.
  • Scavenging hose sends water down the extension shafts, cooling the cutter bit and providing flushing action.
  • Water flushing clears away debris. When water is clear, the tube is clean!
  • Direct drive increases power and minimizes moving parts.
PG Series Kit Includes:
  • PG or PGX-2 Air Motor
  • 4 5-Foot Drill Shafts
  • 2 M Cutter Bits
  • 2 M/SPE-DUR Cutter Bits
  • Spare Rotor Blades
  • 3/8-Inch Scavenging Hose (15 Feet/4.5M)
  • Set of Spare Rotor Blades, Rotor Wrench, and Adjustable Wrench
  • Tool Box
  • Service Manual SM-22 (PG Series), SM-23 (PGX Series)

Check out the PG Series Air-Driven Tube Cleaning Kit Accessories.
 
Air Motor 5 Foot Extension Shaft M Cutter Bits M/SPE-DUR Bit Adapters Scavenging Hose
Tube Inner
Diameter Range		 Complete
Kit*		 Air
Motor 		5-Foot
Ext. Shafts (4) 		M Cutter
Bits (2)**		 M/SPE-DUR
Bit Adapters (2)		 Scavenging
Hose
Inches (mm)
.187 - .205 (4.7 - 5.2) PG 7005   61242-00XX**   8042-0015
(3/8 Inch)
.206 - .304 (5.2 - 7.7) 62327-00XX**
.305 - .318 (7.7 - 8.1) 60605-00XX**
.319 - .374 (8.1 - 9.5)
.375 - .437 (9.5 - 11.1) 6207-0005 7769 7189
.438 - .499 (11.1 - 12.7) 7770
.500 - .562 (12.7 - 14.3) PGX-2 9288 6208-0005 7771 7192
.563 - .624 (14.3 - 15.8) 6209-0005 7786 7194
.625 - .686 (15.9 - 17.4) 7772
.687 - .749 (17.4 - 19.0 6210-0005 7773 7196
.750 - .811 (19.1 - 20.6) 7774
.812 - .874 (20.6 - 22.2) 7775
.875 - .937 (22.2 - 23.8) 6211-0005 7776 7199
.938 - .968 (23.8 - 24.6) 7790
.969 - 1.062 (24.6 - 27.0) 7777
* Complete kit consists of Air Motor, 5-Foot Ext. Shafts, M Cutter Bits, and M/SPE-DUR Bit Adapters.
** For Inner Diameter Range .187 - .374 Inches (4.7-9.5mm) a Bit and Shaft Assembly is provided. Insert "24", "36" or "48" as the last two digits of the Part No. to designate the Shaft length that is required.