WILSON’S TUBE CLEANING EQUIPMENT
Thomas C. Wilson Tube Cleaning Kits for heat exchangers, condensers, and other small diameter vessels remove heavy deposits from all sizes and shapes of tubes. All of our tube cleaning kits are easy to use and require little training or experience to operate. With powerful motors, Wilson Tube Cleaners help you significantly boost your overall productivity, saving you valuable time and resources.
Use our tool guide to help you identify the
correct Wilson Tube Cleaning Equipment.
Available Products
Heat Exchangers,
Condensers, and Other Small Diameter Vessel Tube Cleaning Kits
| The Wils-Away 500 Electric Tube Cleaning System cleans straight and curved tubes in heat exchangers, condensers, chillers, absorbers, water heaters, coolers, and other small diameter pressure vessels. WAW-500 Series drive units are equipped with a safety shaft coupling that snaps under accidental overload, protecting the shaft from breakage. Each kit features a spare coupling and removal tool. One kit cleans varying tube sizes — you only need to replace the brush size and shaft’s casing assembly. |
|
 |
| |
| The Wils-Away 520 Electric Tube Cleaning System cleans straight and curved tubes in heat exchangers, condensers, chillers, absorbers, water heaters, coolers, and other small diameter pressure vessels. |
|
|
| |
| The newly redesigned Wils-Matic™ Auto Tube Puncher reduces cleaning time by an average of 50%, doubling the amount of cleaning that can be preformed compared to units without self-feeding functionality. A feeder gun controls shaft rotation, shaft feed and water flow. The WAM 5500-500 is designed for wet applications and the removal of light to medium deposits in straight tubes including: heat exchangers, condensers, chillers, absorbers and coolers up to fifty feet in length. |
|
|
| |
| Our MS
Series Tube
Cleaning System features an air motor and is designed
for cleaning straight tubes in heat exchangers, condensers, chillers,
absorbers, small diameter boilers, and other pressure vessels with Outer Diameter
pipelines under 2 inches. Its powerful 10,000 rpm air motor cleans in
one pass, saving time and improving productivity. |
 |
|
| |
| Our PG
Series or PGX2 Tube
Cleaning Systems are designed
to clean tubes in heat exchangers, condensers, refinery
fixtures, chillers, absorbers, water geaters, coolers,
evaporators, and other small diameter pressure vessels.
It removes heavy deposits as it drills out deposits
within clogged tubes. To increase cleaning depth with this system, simply
add one of our 5-foot hollow Extension Shafts. Various types of drill
bits & brushes are
available for different scales. Changing the shaft
diameter allows for different sized tubes to be cleaned, using the same
motor. |
 |
|
| |
| The
heavy duty TP-302 Tube
Cleaning System cleans out clogged
tubes and removes heavy deposits. The Carbide-tipped Type M Cutter
Bits literally drill through the heaviest deposits. This kit is
very similar to the PG and PGX2 kits,
except with 30% more power capacity and for a large outer diameter. |
 |
|
| |
| The Blo-Gun
Air/Water Actuated Tube Cleaning System offers the fastest available
method on the market for cleaning tubes in Heat Exchangers. It can also
be used in condensers, chillers, absorbers, water heaters, coolers, and
other small diameter pressure vessels. Its light weight makes transfer
easy and minimizes user fatigue. A Blo-Brush or a Blo-Plug is used with
this tube. The Blo-Gun is used when light scale can be blown out of the
tube, or when hundreds of tubes need to be cleaned per a shift. |
 |
|
| |
| The Wils-Away™ 3000 Pneumatic Tube
Cleaning System can go anywhere electric motors
are not allowed because it is air-driven. Ideal for removing medium to
hard deposits, it also provides
forward/reverse drive via remote foot pedal. With the Air-Driven units
you can control the speed of the shaft and casing for effective cleaning
action. |
 |
|
| The Wils-Away™ 4000 Pneumatic Tube
Cleaning System can go anywhere electric motors
are not allowed because it is air-driven. Ideal for removing medium to
hard deposits, it also provides
forward/reverse drive via remote foot pedal. With the Air-Driven units
you can control the speed of the shaft and casing for effective cleaning
action. |
 |
|
Contact
Us
For more information on Wilson's Tube Expander Equipment and Tools, to
receive a quote, or ask a question, please contact
us. We look forward to hearing from you.
Click here for more information on our catalog
Click here to download catalogs and manuals |
