Thomas C. Wilson Tube Tools
Follow LinkedIn Twitter YouTube

TUBE CLEANING

HEAT EXCHANGERS/CONDENSERS/CHILLERS

Wils-Away™ 500 Electric Tube Cleaning System

Get a Quote

Click to view demonstration

Wils-Away Cleaning

Wils-Away Cleaning

Wils-Away Cleaning

 
Applications:
  • Cleaning Straight and Curved Tubes in Heat Exchangers, Condensers, Chillers, Absorbers, Water Heaters, Coolers, and Other Small Diameter Pressure Vessels
  • 3/8 – 1 1/2-Inch (9.5 to 38.1mm) Outer Diameter Tubes
  • Removing Light to Medium Soft Deposits
Specifications:
Dolly-Mounted
Drive Unit:
55 lbs.; 12”H x 23”W x 11 1/2”D
(25Kg; 305 x 584 x 292mm)
Speed: 1,725 rpm
Power: 1/2 HP (WAW-500 Series)

Wils-Away™ Kit Includes:
  • Electric Drive Unit
  • Foot Pedal-Single Direction
  • Spare Safety Shaft Coupling
  • 25-Foot Shaft & Casing (7.6M)
  • Set of 6 Nylon Spiral Brushes
    -or-
  • Expanding Bronze Brush and Spare Refill Set
  • Service Manual SM-223 (WAW500, 1000)

------------------------------

UL and CE certified.

Twin foot pedal (for remote forward/reverse control) is an optional accessory.

Check out the Wils-Away™ Electric Tube Cleaning Kit Accessories.


Tube ID Range Complete Kit† Drive Unit Flexible Shaft & Casing 6 Nylon Spiral1 Brushes Expanding2 Bronze Brush
Inches (mm)          
.281 - .311 (7.1 - 7.9) WAW-500
(Dolly-Mounted)
9600 9720-0015
(8 x 32 Female Thread)
61746-4025
.312 - .342 (7.9 - 8.7) 61746-4028
.343 - .374 (8.7 - 9.5) 61746-4031
.375 - .405 (9.5 - 10.3) 61746-4034
.406 - .436 (10.3 - 11.1) 62501-4037
.437 - .499 (11.1 - 12.7) 9722-0025
(1/4 x 28 FemaleThread)
62501-4043
.500 - .561 (12.7 - 14.2) 62501-4050
.562 - .624 (14.2 - 15.8) 62501-4056 9900-3003
.625 - .686 (15.9 - 17.4) 9724-0025
(1/4 x 28 Female Thread)
62501-4062 9900-3006
.687 - .749 (17.4 - 19.0) 62501-4068 2456-30023
.750 - .811 (19.0 - 20.6) 62501-4075 2456-30033
.812 - .874 (20.6 - 22.2) 62501-4081 2456-30043
.875 - .936 (22.2 - 23.8) 62501-4087 2456-30063
.937 - .999 (23.8 - 25.4) 62501-4093 2463-30043
1.000 - 1.061 (25.4 - 26.9) 62501-4100 2463-30053
1.062 - 1.124 (26.9 - 28.5)   9728-0025
(9/16 x 12 Male Thread)
2463-30074
1.125 - 1.186 (28.5 - 30.1) WAW-1000
115V 50/60 Hz
9610 2463-30084
1.187 - 1.249 (30.1 - 31.4) 2470-30024

† For other than 115V 50/60Hz units, order WAW-510 (220V 50/60Hz), WAW-530 (115V 50Hz), WAW-540 (220V 60Hz),
WAW-550 (220V 50Hz), or WAW-1100 (220V 50/60Hz).
1. For steel spiral brushes, change the last four digits of the Part No. to "0XXX", for stainless steel "2XXX", for brass "3XXX".
2. For expanding brush with nylon bristles, change the last four digits to "4XXX", for stainless steel "5XXX", for steel "0XXX".
3. These expanding brushes require an adapter (Part No. 9589).
4. These expanding brushes require an adapter (Part No. 9798).

Safety Shaft Coupling

WAW-500 Series drive units are equipped with a safety shaft coupling that snaps under accidental overload, protecting the shaft from breakage. A spare coupling and removal tool are supplied with each kit.