TC Wilson

1-800-230-2636

Get a Quote

TUBE CLEANING

HEAT EXCHANGERS/CONDENSERS/CHILLERS

Wils-Away™ Pneumatic Tube Cleaning System
Wils-Away Pneumatic System
Wils-Away Pneumatic Kit
Applications:
  • Cleaning Tubes in Heat Exchangers, Condensers, Chillers, Absorbers, Water Heaters, Coolers and Other Small Diameter Pressure Vessels
  • 3/8 to 1 1/2-Inch (9.5 to 38.1mm) Outer Diameter Tubes
  • Removing Medium to Hard Deposits
  • Ideal Cleaning System when Electric Power is Not Available
  • Air Motor Enables Operator to Control Speed of Cleaning Head and Shaft & Casing Rotation
Specifications:
Dolly-Mounted Drive Unit 58 lbs.; 12"H x 23"W x 11 1/2"D
(26Kg; 305 x 584 x 292mm)
Compact Drive Unit 32 lbs.; 10"H x 18"W x 8 1/2"D
(14Kg; 254 x 457 x 216mm)
Speed 500 to 3,000 rpm
Air Consumption 15 CFM @ 90 psi (WAW-3000)
40 CFM @ 90 psi (WAW-4000)
Power 1 1/2 HP (WAW-3000)
4 HP (WAW-4000)
Accessories Air Hose 3/8-Inch Minimum
1/2-Inch - 50 Feet
Part No. 9600-0121


Smart Tool:
  • Kit includes Drive Unit and all accessories required for thorough tube cleaning.
  • Spiral brushes clean many tubes in one pass.
  • Expanding brush removes heavier deposits.
  • Runs wet or dry without lubrication.
  • When run wet, water aids cleaning action and flushes away debris. When the water is clear, the tube is clean!
  • WAW-3000 offers forward/reverse drive via remote foot pedal.
  • Air-activated foot pedal ensures operator safety.
Wils-Away™ Pneumatic Kit Includes:
  • Dolly-Mounted or Compact Drive Unit with Tool Compartment
  • Flexible Shaft & Casing
  • Foot Pedal
  • 6 Nylon Spiral Brushes
    -or-
  • Expanding Bronze Brush and Spare Refill Set
  • Service Manual SM-243 (WAW-3000) SM-226 (WAW-4000)

Note: The WAW-3000 and WAW-4000 use the same accessories as the WAW-500/1000 series, so refer to the chart on Wils-Away™ Electric Tube Cleaning System for accessories.
 
Tube ID Range Complete
Kit*		 Drive
Unit 		Flexible
Shaft
& Casing		 6 Nylon1
Spiral Brushes		 Expanding2
Bronze Brush
Inches (mm)
.281 - .311 (7.1 - 7.9) WAW-3000
(1 1/2 HP Compact Unit)

- or -

WAW-4000
(4 HP Dolly-Mounted Unit)		 9502

- or -

9800
9720-0015
(8x32 Female thread)		 61746-4025 –
.312 - .342 (7.9 - 8.7) 61746-4028 –
.343 - .374 (8.7 - 9.5) 61746-4031 –
.375 - .405 (9.5 - 10.3) 61746-4034 –
.406 - .436 (10.3 - 11.1) 62501-4037 –
.437 - .499 (11.1 - 12.7) 9722-0025
(1/4x28 Female Thread)		 62501-4043 –
.500 - .561 (12.7 - 14.2) 62501-4050 –
.562 - .624 (14.2 - 15.8) 62501-4056 9900-3003
.625 - .686 (15.9 - 17.4) 9724-0025
(1/4x28 Female Thread)		 62501-4062 9900-3006
.687 - .749 (17.4 - 19.0) 62501-4068 2456-30023
.750 - .811 (19.0 - 20.6) 62501-4075 2456-30033
.812 - .874 (20.6 - 22.2) 62501-4081 2456-30043
.875 - .936 (22.2 - 23.8) 62501-4087 2456-30063
.937 - .999 (23.8 - 25.4) 62501-4093 2463-30043
1.000 - 1.061 (25.4 - 26.9) 62501-4100 2463-30053
1.062 - 1.124 (26.9 - 28.5) 9728-0025
(9/16x12 Male Thread)		   2463-30074
1.125 - 1.186 (28.5 - 30.1) 2463-30084
1.187 - 1.249 (30.1 - 31.4) 2470-30024
* Complete kit consists of drive unit, flexible shaft and casing, and 6 nylon spiral brushes or expanding bronze brush.
1 For steel spiral brushes, change the last four digits of the Part No. to "0XXX", for stainless steel "2XXX", for brass "3XXX".
2 For expanding brush with nylon bristles, change the last four digits to "4XXX", for stainless steel "5XXX", for steel "0XXX".
3 These expanding brushes require an adapter (Part No. 9589).
4 These expanding brushes require an adapter (Part No. 9798).