TC Wilson
1-800-230-2636
Follow LinkedIn YouTube

TUBE CLEANING

HEAT EXCHANGERS/CONDENSERS/CHILLERS

Wils-Matic Auto Tube Puncher

Get a Quote

 Click to view demonstration

 

  

Applications

  • Cleaning Straight Tubes in Heat Exchangers, Condensers, Chillers, Absorbers, Water Heaters, Coolers and Other Small Diameter Pressure Vessels
  • 1/2 – 1 1/4-Inch (15.9 to 31.8 mm) Outer Diameter Tubes
  • Removing Light to Medium Soft Deposits
Specifications:
Dolly-mounted
Drive Unit 		85 lbs., 42"H x 30"W x 16"D
(38 kg, 1067 x 762 x 406 mm)
(excluding Gun Assembly & Shaft)
Shaft Speed 1,725 rpm
Self Feed Rate 4.2 Feet (1.3m) per second
Feed Force: 60 lbs. (267 N)
Motor Power 1 HP (0.75kW)
Input Power 15 amps
Voltage/Frequency 115 volt, 60 Hz
(220 volt, 50/60 Hz available)

Auto Tube Puncher Kit Includes:
  • Electronic Drive Unit with portable dolly
  • Feeder Gun Assembly
  • Feeder Gun Safety Harness
  • Shaft & Casing - 45 feet
  • Shaft Length Stop unit
  • Service Manual SM-165

    • How it works

    During operation, a feeder gun controls shaft rotation, shaft feed, and the water flow. By just pressing the top of the trigger, you will rotate the shaft clockwise, start water flow, and feed the Shaft & Casing into the tube. By pressing the bottom of the trigger, you will reverse the shaft rotation and pull out the Shaft & Casing from the inside of the tube. The distance to be cleaned is set by an adjustable Shaft & Casing length stop unit, and the shaft feed stops when it reaches the set distance.
 
Tube ID Range Complete
Kit*		 Drive
Unit		 Flexible Shaft
& Casing† 		Feeder Gun Assembly & Safety Harness Shaft Length Stop Unit
Inches (mm) WAM-5500-375 9992-1600 9722-0045
(1/4 X 28 Female Thread) 		9992-3105
&
9992-3150		 9992-4030
.437 - .499 (11.1 - 12.7)
.500 - .561 (12.7 - 14.2)
.562 - .624 (14.2 - 15.8) WAM-5500-500 9724-0045
(1/4 X 28 Female Thread) 		9992-4000
.625 - .686 (15.9 - 17.4)
.687 - .749 (17.4 - 19.0)
.750 - .811 (19.0 - 20.6)
.812 - .874 (20.6 - 22.2)
.875 - .936 (22.2 -23.8)
.937 - .999 (23.8 - 25.4)
1.000 - 1.061 (25.4 - 26.9)  
* Complete kit consists of Drive Unit, Flexible Shaft and Casing, Feeder Gun Assembly and Safety Harness, and Shaft Length Stop Unit.
** For 220V 30/60Hz units, order WAM-5520-375 and WAM-5520-500
† Longer length available (see page 31)

 


Accessories:
     
Nylon Spiral Brushes Brush Diameter Spin Grit Brush Brush Diameter Spin Clean Brush Brush Diameter
Inches (mm) Inches (mm) Small Large
62501-4043 7/16 (11.1) 62551-0062 5/8 (15.9)
62501-4050 1/2 (12.7) 62551-0075 3/4 (19.1) 62615-0075 .500 .750
62501-4056 9/16 (14.3)
62501-4062 5/8 (15.9) 62551-0100 1 (25.4) 62615-0100 .625 1.000
62501-4068 11/16 (17.5)
62501-4075 3/4 (19.1) 62615-0112 .750 1.125
62501-4081 13/16 (20.6) 62551-0125 1 1/8 (28.6)
62501-4087 7/8 (22.2)
62501-4093 15/16 (23.8)
62501-4100 1 (25.4) 62615-0175 1.000 1.375