1-Revolution Condenser Tube Cutter

SKU: N/A

One Revolution Tube Cutters are used in heat exchangers. They cut up to 10-inch thick tubesheets and tube with 1/2 to 1 1/2-inch (12.7 – 38.1mm) Outer Diameter. No special drives are required as Wilson Tube Cutters can be used with a hand wrench or ratchet. These tube cutters are manually operated by a hand wrench or ratchet and can be effectively used to vent tubes before plugging.

Log in to see prices

Features
Reviews (0)

For use in heat exchangers
Cuts up to 10-inch thick tubesheets
No special drive required, uses either a ratchet or hand ratchet
Easily replaceable cutter

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Tube OD		Tube	Tube Cutter	Hex Drive	Replacement
Inches	(mm)	GA	Assembly	Inches	Cutter Bits
1/2	(12.7)	18-19	475000019	5/16	475000005
1/2	(12.7)	20-22	475000022	5/16	475000006
5/8	(15.9)	15-16	476250016	3/8	476250004
		17-18	476250018		476250005
		19-20	476250020		476250005
		21-22	476250022		477500005
3/4	(19.1)	14-15	477500015	1/2
		16	477500016
		17-18	477500018
		19-20	477500020		478750005
7/8	(22.2)	14-15	478750015	5/8
		16-17	478750017
		18	478750018
		19-20	478750020		471000005
1	(25.4)	15	471000015	3/4
		16-17	471000017
		18-20	471000020
		21-22	471000022
1 1/4	(31.8)	12	471250012	1
		13-14	471250014
		15-16	471250016
		17-19	471250019
1 1/2	(38.1)	12-13	471500013	1	471500005
		14-15	471500015
		16-17	471500017
		18-19	471500019

Customers Also Purchase These Items

Featured

Air-Drive 932 Pneumatic Tube Roller
Featured

Expander Lube, Type B