Thomas C. Wilson - Cutter Bit, Carbide-Tipped

Cutter Bit, Carbide-Tipped - Model KCaldera Hollín Brush

Wilson's Sectional Brushes are used for removing rust, polishing, and de-burring straight or curved 1 1/4 – 3-Inch (31.8 to 76.2) Outer Diameter tubes. Available in sets of four, these brushes are replaceable, economical and easy to install.

Options:

Price: Get Quote

WEB ID: 85430153

Applications
Smart Tool

Designed for Use with PG, PGX-2, and TP-302 Drive Units
SPE-DUR Cutter Bit: Carbide-Tipped Cutter Bit for General Purpose Cleaning
M Cutter Bit: Twist Drill Type Cutter Bit with Carbide-tip to Clear Clogged Tubes
K Cutter Bit: Also a Carbide-Tipped Cutter Bit for Larger Tubes
P Brush: Light Cleaning or Finish-Up Cleaning After Using a Cutter Bit to Clean Heavily Blocked or Clogged

Use Wilson Cutter Bits to clean heavily clogged tubes. Carbide tip literally cuts through hardest, heaviest debris, scale, and residue.
Use P Brush for finishing up, removing scale broken free by cutter bit.
For manual boiler cleaning, attach P Brush to push rod.
If thread on P Brush or cutter bit does not match thread on drive motor, select adapter.

Tube ID Range		P Brush (Steel)* Part No.	Diam. (Inches)	Male Thread	SPE-DUR Cutter Bit	Diam. (Inches)	Female Thread	M Cutter Bit	Diam. (Inches)	Thread
Inches	(mm)	P Brush (Steel)* Part No.	Diam. (Inches)	Male Thread	SPE-DUR Cutter Bit	Diam. (Inches)	Female Thread	M Cutter Bit	Diam. (Inches)	Thread
.359 - .389	(9.1 - 9.9)	8543-0135	.343	8x32	7162	.343	12x28
.390 - .420	(9.9 - 10.7)	8543-0138	.375		7162	.343
.421 - .452	(10.7 - 11.5)	8543-0140	.406		7163	.406
.452 - .483	(11.5 - 12.3)	8543-0143	.437		7163	.406
.484 - .514	(12.3 - 13.1)	8543-0146	.468		7164	.468	1/4x28	7771	.468	1/4x28 (F)
.515 - .545	(13.1 - 13.8)	8543-0150	.500		7165	.500	5/16x24	7786	.500	5/16x24 (F)
.546 - .577	(13.8 - 14.7)	8543-0153	.531					7772	.562
.578 - .608	(14.7 - 15.4)	8543-0155	.562	5/16x24	7166	.562		7772	.562
.609 - .639	(15.5 - 16.2)	8543-0159	.593		7166	.562		7773	.625	3/8x24 (F)
.640 - .675	(16.2 - 17.2)	8544-0162	.625		7167	.625
.676 - .706	(17.2 - 17.9)	8544-0165	.656
.707 - .737	(17.9 - 18.7)	8544-0167	.687		7168	.687	3/8x24	7774	.687
.738 - .769	(18.7 - 19.5)	8544-0171	.718		7169	.750		7775	.750
.770 - .800	(19.6 - 20.3)	8544-0174	.750		7169	.750		7775	.750
.801 - .831	(20.4 - 21.1)	8544-0177	.781		7170	.812		7776	.812
.832 - .862	(21.1 - 21.9)	8544-0182	.812		7170	.812		7776	.812
.863 - .894	(21.9 - 22.7)	8544-0183	.843		7171	.875	7/16x20	7790	.875	7/16x20 (F)
.895 - .925	(22.7 - 23.5)	8545-0186	.875		7171	.875		7790	.875
.926 - .956	(23.5 - 24.3)	8545-0190	.906		7172	.937		7777	.906
.957 - .987	(24.3 - 25.1)	8545-0193	.937		7172	.937		7777	.906
.988 - 1.024	(25.1 - 26.0)	8545-0196	.968		7173	1.000		7791	1.000
1.025 - 1.055	(26.0 - 26.8)	8545-0200	1.000		7173	1.000		7791	1.000
1.056 - 1.086	(26.8 - 27.6)	8545-0203	1.031		K Cutter Bit			7778	1.062
1.087 - 1.117	(27.6 - 28.4)	8545-0206	1.062					7778	1.062
1.118 - 1.149	(28.4 - 29.2)	8545-0210	1.093					7792	1.125
1.150 - 1.180	(29.2 - 30.0)	8545-0211	1.125					7792	1.125
1.181 - 1.211	(30.0 - 30.8)	8545-0215	1.156					7779	1.187	1/2x20 (M)
1.212 - 1.242	(30.8 - 31.6)	8545-0218	1.187					7779	1.187
1.243 - 1.280	(31.6 - 32.5)	8545-0220	1.218					7793	1.250
1.281 - 1.374	(32.5 - 34.9)	8545-0225	1.250					7793	1.250
1.375 - 1.436	(34.9 - 36.5)	8545-0230	1.312					7780	1.312
1.437 - 1.499	(36.5 - 38.1)	8545-0235	1.375					K Cutter Bit 7703	1.375
1.500 - 1.561	(38.1 - 39.6)	8542-0145	1.437	5/8x11
1.562 - 1.686	(39.6 - 42.8)	8542-0150	1.500
1.687 - 1.811	(42.8 - 46.0)	8542-0161	1.625					7705	1.625
1.812 - 1.936	(46.0 - 49.2)	8542-0175	1.750					7706	1.750
1.937 - 2.061	(49.2 - 52.3)	8542-0188	1.875					7707	1.875
2.062 - 2.186	(52.4 - 55.5)	8542-0194	2.000					7708	2.000	5/8x18 (M)

Cutter Bit, Carbide-Tipped - Model K

Shopping Cart: 0 Items